| Official Luthiers Forum! http://www-.luthiersforum.com/forum/ |
|
| X bracing http://www-.luthiersforum.com/forum/viewtopic.php?f=10102&t=8978 |
Page 1 of 1 |
| Author: | Natethehappyman [ Mon Oct 23, 2006 11:44 am ] |
| Post subject: | |
Howdy! I'm building a mandolin, I have built a mando with F holes before, but this is my first time building one with a A soundhole. My question is about the X bracing pattern that is used on Mandolins with A soundholes. I know that on the mandos with F holes you use two parallel tone bars, one treble and one bass, and that they are carved different thickneses. My question is: Does the X bracing have a diffrential bass and treble side? Are the two bars carved differently? Any information on the X bracing pattern would be greatly appreciated. Thank you very much! My very best regards! -Nate, the happy man! |
|
| Author: | Alain Desforges [ Tue Oct 24, 2006 12:54 am ] |
| Post subject: | |
Bump! |
|
| Author: | Dave-SKG [ Tue Oct 24, 2006 1:10 am ] |
| Post subject: | |
StewMac sells a video set that is quite good. You may want to check it out. |
|
| Author: | crowduck [ Tue Oct 24, 2006 7:26 am ] |
| Post subject: | |
Check with Roger Siminoff at the link below. CrowDuck http://www.siminoff.net/ |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|